The ultimate car shine requires paint polishing. No wax could improve the consistency of both the paint surfaces and the standards for polishing. The best car polishing process involves the application of a very fine coating on the body of the vehicle. Polishing flattens the paint surface to remove nasty scratches and swirls on the paintwork.  

These marks are most noticeable on darker colored cars. It also shows when checking out the paint under the sun or a halogen light. A well-finished paint surface can result in regular shine, reflectivity depth, and showroom gloss. When your car’s paint is prepared to be polished by thoroughly washing the car and applying a clay bar. A car detailing business will polish the paint surface of your vehicle to remove all the fine swirls, cracks, water spots, and rust on the paint surface to improve the overall look of your car. 

How to Polish Your Car 

Polishing your car’s paint is almost the same as sanding wood. Using a standard wooden block sander, the surface may be slightly uneven. Swirled paint surfaces are often irregular, as the swirls are in fact indentations found in the clear coating, resulting in uneven and bumpy surfaces. Such an uneven surface prevents full reflectivity and optical clarity, as thousands of edges were produced by those uneven surfaces in the clear coating that will cast off the light in different directions, which results in a distorted reflection.  

The proper polishing of the paint is the same as sanding blocks of wood as it uses multiple steps to preserve the surface’s flatness. The surfaces become very smooth after a block of wood has been sanded. It also becomes remarkably smooth after painting. Such a surface will bounce off luminous reflections in any direction. The paint surface gets the ideal optical clarity, as well as a deep and accurate reflectivity as light bounces out in a single direction. 

The Car Painting Process  

Improving many paint surfaces require a 2-step process. The first phase involves the removal of paint imperfections. The second step is finishing. Many new vehicles have soft clearcoats that facilitate the removal of most kinds of defects, which require less complicated methods. Many European automakers, particularly Ferrari and Mercedes Benz, have added some ceramic particles to the clear coating to make their cars scratch-resistant. Such ceramic clearcoats need very precise polishes to clean those very hard surfaces effectively.  

As mentioned earlier, most car detailing shops, especially during the polishing process, may not have the time necessary to care for the vehicle properly. You need to use aggressive polishing compounds, such as a solvent designed to quickly flatten paint surfaces using a dangerously high speed of wool buffing. If used by an inexperienced technician, the process could remove the clear coating paint of the vehicle. Buffing also requires patience and experience or else, mishaps will easily happen. 

Going back to sanding blocks of wood, aggressive sandpaper levels the surface easily. After that step, you must refine the car’s smoothness by using finer sandpaper. Finer sandpaper is then used to create an ideally smooth surface. For more information, hire the best car detailing in Greeley Colorado.